Our Publications

2023

  • Chen, X., Boston, M., Bell, D., Roy, K., Mares, J., & Lim, J. B. (2023). Moment capacity of eaves brackets of cold-formed steel portal frames. Thin-walled Structures, 189, 110947.
  • Wrzesien, A. M., Roy, K., Fang, Z., & Lim, J. B. (2023). Tests, modelling and design of cold-formed steel moment resisting joints with bolts in the web and outer flange. Thin-Walled Structures, 182, 110176.
  • Fang, Z., Roy, K., Padiyara, S., Chen, B., Raftery, G. M., & Lim, J. B. (2023). Web crippling design of cold-formed stainless steel channels under interior-two-flange loading condition using deep belief network. Structures, 47, 1967–1990.
  • Fang, Z., Roy, K., Chandramohan, D. L., Yousefi, A., Al-Radhi, Y., & Lim, J. B. P. (2023). End-One-Flange Web Crippling Behavior of Cold-Formed High-Strength Steel Channels with Web Holes at Elevated Temperatures. Buildings, 13(2), 266.
  • Dai, Y., Roy, K., Fang, Z., Raftery, G. M., & Lim, J. B. P. (2023). Structural Performance of Cold-Formed Steel Face-to-Face Built-Up Channel Sections under Axial Compression at High Temperatures through Finite Element Modelling. Buildings, 13(2), 305.
  • Ng, A. L. Y., Lau, H. H., Fang, Z., Roy, K., Raftery, G. M., & Lim, J. B. (2023). Experimental studies of timber to cold-formed steel connections with self-drilling screws. Structures, 49, 492–507.
  • Dart, S., & Lim, J. B. P. (2023). Three-Dimensional Printed Models for Teaching and Learning Structural Engineering Concepts: Building Intuition by Physically Connecting Theory to Real Life. Journal of Civil Engineering Education, 149(2).
  • Rehman, H. U., Ali, S., Masood, R., Khan, M. S., Alamgir, S., Javed, M. S., Roy, K., & Lim, J. B. (2022). A multi-facet BIM based approach for Green Building design of new multi-family residential building using LEED system. The International Journal of Construction Management, 1–15.
  • Pourmasoud, M., Park, A. R., Hajirasouliha, I., Lim, J., & Behzadi, A. (2023). Validation of a New Equation to Estimate the Yield Strength of Lead Rubber Bearings. Procedia Structural Integrity, 44, 590–597.
  • Taylor, C., Roy, K., Dani, A. A., Lim, J. B. P., De Silva, K., & Jones, M. (2023). Delivering Sustainable Housing through Material Choice. Sustainability, 15(4), 3331.
  • Masood, R., Roy, K., González, V. A., Lim, J. B., & Nasir, A. R. (2023). A supply chain perspective of prefabricated housebuilding diffusion in New Zealand. Engineering, Construction and Architectural Management.
  • Al-Radhi, Y., Roy, K., Liang, H., Ghosh, K., Clifton, G. C., & Lim, J. B. (2023). Thermal performance of different construction materials used in New Zealand dwellings comparatively to international practice – A systematic literature review. Journal of Building Engineering, 72, 106346.
  • Chen, X., Boston, M., Bell, D., Mares, J., Roy, K., & Lim, J. B. (2023). Moment capacity of apex brackets of cold-formed steel portal frames. Thin-walled Structures, 185, 110574.
  • Wrzesien, A. M., McCrum, D. P., Mishra, S., Broderick, B. M., & Lim, J. B. (2023). Lateral resistance performance evaluation of cold-formed steel zero-tolerance bolted moment-resisting frames. Structures, 50, 590–602.
  • Hasanali, M., Mojtabaei, S. M., Hajirasouliha, I., Roy, K., & Lim, J. B. (2023). More accurate design equations for cold-formed steel members subjected to combined axial compressive load and bending. Thin-Walled Structures, 185, 110588.
  • Samuel, J., Nair, S. R., Joanna, P. S., Gurupatham, B. G. A., Roy, K., & Lim, J. B. P. (2023). Composite Cold-Formed Steel Beams with Diagonal Rebars for Earthquake-Resistant Buildings. Materials, 16(8), 3002.
  • Roy, K., Rezaeian, H., Lakshmanan, D., Fang, Z., Ananthi, G. B. G., & Lim, J. B. (2023). Structural behaviour of cold-formed steel T-Stub connections with HRC and screws subjected to tension force. Engineering Structures, 283, 115922.
  • Fang, Z., Roy, K. & Lim, J.B.P. Structural Design for Roll-Formed Aluminium Alloy Perforated Channels Subjected to Interior-Two-Flange Web Crippling: Experimental Tests, Numerical Simulation, and Neural Network. Int J Steel Struct 23, 692–708 (2023).
  • Paul, B., Roy, K., Lim, J. B., Fang, Z., McCollum, K., & Bell, D. (2023). Moment-capacity of bolted side-plates for apex joint of nested tapered box beam portal frames. Journal of Building Engineering, 76, 107011.
  • Masood, R., Roy, K., Gonzalez, V. A., Lim, J. B., & Nasir, A. R. (2023). Modeling relational performance of the supply chains for prefabricated housebuilding in New Zealand. Smart and Sustainable Built Environment.
  • Gurupatham, B. G. A., Roy, K., Ghosh, K., Poologanathan, K., & Lim, J. B. (2023). An investigation on stiffened cold-formed steel unequal angle box section columns. Journal of Building Engineering, 106989.
  • Chen, X., Boston, M., Bell, D., Roy, K., Mares, J., & Lim, J. B. (2023). Moment capacity of eaves brackets of cold-formed steel portal frames. Thin-walled Structures, 189, 110947.

2022

  • Chandramohan, D. L., Roy, K., Taheri, H., Karpenko, M., Fang, Z., & Lim, J. B. P. (2022). A State of the Art Review of Fillet Welded Joints. Materials, 15(24), 8743.
  • Hasanali, M., Roy, K., Mojtabaei, S. M., Hajirasouliha, I., Clifton, G. C., & Lim, J. B. (2022). A critical review of cold-formed steel seismic resistant systems: Recent developments, challenges and future directions. Thin-Walled Structures, 180, 109953.
  • Roy, K., Rezaeian, H., Fang, Z., Raftery, G. M., & Lim, J. B. (2022). Experimental and numerical study of a novel cold-formed steel T-Stub connection subjected to tension force. Journal of Constructional Steel Research, 197, 107466.
  • Fang, Z., Roy, K., Ingham, J. M., & Lim, J. B. (2022). Assessment of end-two-flange web crippling strength of roll-formed aluminium alloy perforated channels by experimental testing, numerical simulation, and deep learning. Engineering Structures, 268, 114753.
  • Fang, Z., Roy, K., Dai, Y., & Lim, J. B. (2022). Effect of web perforations on end-two-flange web crippling behaviour of roll-formed aluminium alloy unlipped channels through experimental test, numerical simulation and deep learning. Thin-Walled Structures, 179, 109489.
  • Fang, Z., Roy, K., Lakshmanan, D., Pranomrum, P., Li, F., Lau, H. H., & Lim, J. B. (2022). Structural behaviour of back-to-back cold-formed steel channel sections with web openings under axial compression at elevated temperatures. Journal of Building Engineering, 54, 104512.
  • Dai, Y., Roy, K., Fang, Z., Chen, B., Raftery, G. M., & Lim, J. B. (2022). A novel machine learning model to predict the moment capacity of cold-formed steel channel beams with edge-stiffened and un-stiffened web holes. Journal of Building Engineering, 53, 104592.
  • Gurupatham, B. G. A., Roy, K., Raftery, G. M., & Lim, J. B. P. (2022). Influence of Intermediate Stiffeners on Axial Capacity of Thin-Walled Built-Up Open and Closed Channel Section Columns. Buildings, 12(8), 1071.
  • Fang, Z., Roy, K., Xu, J., Dai, Y., Paul, B., & Lim, J. B. (2022). A novel machine learning method to investigate the web crippling behaviour of perforated roll-formed aluminium alloy unlipped channels under interior-two flange loading. Journal of Building Engineering, 51, 104261.
  • Fang, Z., Roy, K., Chen, B., Xie, Z., Ingham, J., & Lim, J. B. (2022). Effect of the web hole size on the axial capacity of back-to-back aluminium alloy channel section columns. Engineering Structures, 260, 114238.
  • Milewska, A., Roy, K., Milewski, P., Pham, C. H., Charles Clifton, G., Quenneville, P., & Lim, J. B. (2022). Power-actuated fasteners in single shear-An experimental investigation and proposed design rules. Engineering Structures, 259, 114124.
  • Aruna, G., Roy, K., Lim, J. B. P., & Suresh Kumar, P. (2022). Cold-Formed Steel Equal Angles with Complex Edge Stiffeners under Axial-Compression Laboratory Testing, Numerical Simulation, and Design. Practice Periodical on Structural Design and Construction, 27(2).
  • Fang, Z., Roy, K., Chen, B., Xie, Z., & Lim, J. B. (2022). Local and distortional buckling behaviour of aluminium alloy back-to-back channels with web holes under axial compression. Journal of Building Engineering, 47, 103837.
  • Wu, H., Liang, H., Roy, K., Harrison, E., Fang, Z., De Silva, K., Collins, N., & Lim, J. B. P. (2022). Analyzing the Climate Change Potential of Residential Steel Buildings in New Zealand and Their Alignment in Meeting the 2050 Paris Agreement Targets. Buildings, 12(3), 290.
  • Hasanali, M., Mojtabaei, S. M., Clifton, G. C., Hajirasouliha, I., Torabian, S., & Lim, J. B. (2022). Capacity and design of cold-formed steel warping-restrained beam-column elements. Journal of Constructional Steel Research, 190, 107139.
  • Pourmasoud, M. M., Lim, J. B. P., Hajirasouliha, I., & McCrum, D. (2020). Multi-Directional Base Isolation System for Coupled Horizontal and Vertical Seismic Excitations. Journal of Earthquake Engineering, 26(3), 1145–1170.
  • Roy, K., Ho Lau, H., Fang, Z., Masood, R., Chui Huon Ting, T., Lim, J. B., & Chieng Chen Lee, V. (2022). Effects of corrosion on the strength of self-drilling screw connections in cold-formed steel structures-experiments and finite element modeling. Structures, 36, 1080–1096.
  • Roy, K., Chen, B., Fang, Z., Uzzaman, A., & Lim, J. B. P. (2022). Axial Capacity of Back-to-Back Built-Up Aluminum Alloy Channel Section Columns. Journal of Structural Engineering, 148(2).
  • Chen, B., Roy, K., Fang, Z., Uzzaman, A., Pham, C. H., Raftery, G. M., & Lim, J. B. P. (2022). Shear Capacity of Cold-Formed Steel Channels with Edge-Stiffened Web Holes, Unstiffened Web Holes, and Plain Webs. Journal of Structural Engineering, 148(2).
  • Fang, Z., Roy, K., Uzzaman, A., & Lim, J. B. (2022). Numerical simulation and proposed design rules of cold-formed stainless steel channels with web holes under interior-one-flange loading. Engineering Structures, 252, 113566.
  • Ur Rehman, H. S., Raza, M. A., Masood, R., Khan, M. A., Alamgir, S., Javed, M. A., Roy, K., & Lim, J. B. P. (2022). A multi-facet BIM based approach for Green Building design of new multi-family residential building using LEED system. International Journal of Construction Management, 1–15.
  • Dani, A. A., Roy, K., Masood, R., Fang, Z., & Lim, J. B. P. (2022). A Comparative Study on the Life Cycle Assessment of New Zealand Residential Buildings. Buildings, 12(1), 50.
  • Masood, R., Lim, J., González, V., Roy, K., & Khan, K. (2022). A Systematic Review on Supply Chain Management in Prefabricated House-Building Research. Buildings, 12(1), 40.
  • Roy, K., Su, R., Dani, A. A., Fang, Z., Liang, H., & Lim, J. B. P. (2022). Spatiotemporal Model to Quantify Stocks of Metal Cladding Products for a Prospective Circular Economy. Applied Sciences, 12(9), 4597.
  • Liang, H., Roy, K., Fang, Z., & Lim, J. B. P. (2022). A Critical Review on Optimization of Cold-Formed Steel Members for Better Structural and Thermal Performances. Buildings, 12(1), 34.
  • Jabbari, M., Raftery, G. M., & Lim, J. B. (2022). Environmental durability of epoxy-bonded CFRP-to-steel joints in mode I fracture. International Journal of Adhesion and Adhesives, 112, 103034.

2021

  • Fang, Z., Roy, K., Chi, Y., Chen, B., Lim, J.B.P. (2021), Finite element analysis and proposed design rules for cold-formed stainless steel channels with web holes under end-one-flange loading, Structures, 34, pp. 2876-2899.
  • Feng, R., Chen, L., Chen, Z., Chen, B., Roy, K., Lim, J.B.P. (2021), Experiments on stainless steel hybrid K-joints with square braces and circular chord, Journal of Constructional Steel Research, 185
  • Rezaeian, H., Roy, K., Yekrangnia, M., Chen, B., Lim, J.B.P. (2021), Tests, numerical modelling and design of a novel cold-formed steel Tab connection, Journal of Constructional Steel Research, 185
  • Fang, Z., Roy, K., Ma, Q., Uzzaman, A., Lim, J.B.P. (2021), Application of deep learning method in web crippling strength prediction of cold-formed stainless steel channel sections under end-two-flange loading, Structures, 33, pp. 2903-2942.
  • Fang, Z., Roy, K., Mares, J., Sham, C.-W., Chen, B., Lim, J.B.P. (2021), Deep learning-based axial capacity prediction for cold-formed steel channel sections using Deep Belief Network, Structures, 33, pp. 2792-2802.
  • Roy, K., Lau, H.H., Fang, Z., Ahmed, A.M.M., Lim, J.B.P.(2021), Axial capacity of back-to-back built-up cold-formed stainless steel unlipped channels-Numerical investigation and parametric study
  • Steel and Composite Structures, 40(5), pp. 761-780.
  • Fang, Z., Roy, K., Chen, B., Sham, C.-W., Hajirasouliha, I., Lim, J.B.P. (2021), Deep learning-based procedure for structural design of cold-formed steel channel sections with edge-stiffened and un-stiffened holes under axial compression, Thin-Walled Structures, 166
  • Ananthi, G.B.G., Roy, K., Lim, J.B.P. (2021), Tests and Finite Element Modelling of Cold-Formed Steel Zed and Hat Section Columns Under Axial Compression, International Journal of Steel Structures, 21 (4), pp. 1305-1331.
  • Chen, X., Blum, H.B., Roy, K., Pouladi, P., Uzzaman, A., Lim, J.B.P.(2021), Cold-formed steel portal frame moment-resisting joints: Behaviour, capacity and design, Journal of Constructional Steel Research, 183
  • Ananthi, G.B.G., Deepak, M.S., Roy, K., Lim, J.B.P. (2021), Influence of intermediate stiffeners on the axial capacity of cold-formed steel back-to-back built-up unequal angle sections, Structures, 32, pp. 827-848.
  • Feng, R., Chen, L., Chen, Z., Chen, B., Roy, K., Lim, J.B.P. (2021), Nonlinear behaviour and design of stainless steel hybrid tubular K-joints with SHS-to-CHS, Journal of Constructional Steel Research, 183
  • Chi, Y., Roy, K., Chen, B., Fang, Z., Uzzaman, A., Ananthi, G.B.G., Lim, J.B.P.(2021), Effect of web hole spacing on axial capacity of back-to-back cold-formed steel channels with edge-stiffened holes
  • Steel and Composite Structures, 40 (2), pp. 287-305.
  • Roy, K., Chen, B., Fang, Z., Uzzaman, A., Chen, X., Lim, J.B.P. (2021), Local and distortional buckling behaviour of back-to-back built-up aluminium alloy channel section columns, Thin-Walled Structures, 163
  • Feng, R., Xu, J., Chen, Z., Roy, K., Chen, B., Lim, J.B.P. (2021), Numerical investigation and design rules for stress concentration factors of stainless-steel hybrid tubular joints, Thin-Walled Structures, 163
  • Chen, B., Roy, K., Fang, Z., Uzzaman, A., Chi, Y., Lim, J.B.P. (2021), Web crippling capacity of fastened cold-formed steel channels with edge-stiffened web holes, un-stiffened web holes and plain webs under two-flange loading, Thin-Walled Structures, 163
  • Chen, B., Roy, K., Fang, Z., Uzzaman, A., Raftery, G., Lim, J.B.P. (2021), Moment capacity of back-to-back cold-formed steel channels with edge-stiffened holes, un-stiffened holes, and plain webs, Engineering Structures, 235
  • Jing, J., Clifton, G.C., Roy, K., Lim, J.B.P. (2021), Seismic protection of modular buildings with galvanised steel wall tracks and bonded rubber units: Experimental and numerical study, Thin-Walled Structures, 162
  • Feng, R., Tang, C., Chen, Z., Roy, K., Chen, B., Lim, J.B.P. (2021), A numerical study and proposed design rules for stress concentration factors of stainless steel hybrid tubular K-joints, Engineering Structures, 233
  • Feng, R., Wu, C., Chen, Z., Roy, K., Chen, B., Lim, J.B.P. (2021), Finite element modelling and proposed design rules of stainless steel hybrid tubular joints with square braces and circular chord, Journal of Constructional Steel Research, 179
  • Beulah Gnana Ananthi, G., Roy, K., Ahmed, A.M.M., Lim, J.B.P. (2021), Non-linear behaviour and design of web stiffened battened built-up stainless steel channel sections under axial compression, Structures, 30, pp. 477-494.
  • Roy, K., Ho Lau, H., Ahmed, A.M.M., Lim, J.B.P. (2021), Nonlinear behavior of cold-formed stainless steel built-up box sections under axial compression, Structures, 30, pp. 390-408.
  • Roy, K., Ting, T.C.H., Lau, H.H., Masood, R., Alyousef, R., Alabduljabbar, H., Alaskar, A., Alrshoudi, F., Lim, J.B.P. (2021), Cold-Formed Steel Lipped Channel Section Columns Undergoing Local-Overall Buckling Interaction
  • International Journal of Steel Structures, 21 (2), pp. 408-429.
  • Russell, M.J., Clifton, G.C., Lim, J.B.P. (2021), Vertical and horizontal push tests on specimens with a Trefoil decking profile, Structures, 29, pp. 1096-1110.
  • Roy, K., Ho Lau, H., Ting, T.C.H., Chen, B., Lim, J.B.P. (2021), Flexural behaviour of back-to-back built-up cold-formed steel channel beams: Experiments and finite element modelling, Structures, 29, pp. 235-253.
  • Feng, R., Huang, Z., Chen, Z., Roy, K., Chen, B., Lim, J.B.P. (2021), Experimental study on material properties and stress concentration factors of stainless-steel hybrid tubular joints, Construction and Building Materials, 267, art. no. 121103,
  • Masood, R., Lim, J.B.P., González, V.A. (2021), Performance of the supply chains for New Zealand prefabricated house-building, Sustainable Cities and Society, 64, art. no. 102537,
  • Rajamony Laila, L., Gurupatham, B.G.A., Roy, K., Lim, J.B.P. (2021), Influence of super absorbent polymer on mechanical, rheological, durability, and microstructural properties of self-compacting concrete using non-biodegradable granite pulver, Structural Concrete, 22 (S1), pp. E1093-E1116.
  • Rajamony Laila, L., Gurupatham, B.G.A., Roy, K., Lim, J.B.P. (2021), Effect of super absorbent polymer on microstructural and mechanical properties of concrete blends using granite pulver, Structural Concrete, 21 (S1), pp. E898-E915.

2020

  • Feng, R., Liu, J., Chen, Z., Roy, K., Chen, B., Lim, J.B.P. (2020), Numerical investigation and design rules for flexural capacities of H-section high-strength steel beams with and without web openings, Engineering Structures, 225, art. no. 111278,
  • Bahrebar, M., Lim, J.B.P., Clifton, G.C., Zirakian, T., Shahmohammadi, A., Hajsadeghi, M. (2020), Response assessment and prediction of low yield point steel plate shear walls with curved corrugated web plates and reduced beam sections, Structures, 28, pp. 1729-1745.
  • Feng, R., Tang, C., Roy, K., Chen, Z., Chen, B., Lim, J.B.P. (2020), An experimental study on stress concentration factors of stainless steel hybrid tubular K-joints, Thin-Walled Structures, 157, art. no. 107064,
  • Chen, B., Roy, K., Uzzaman, A., Lim, J.B.P. (2020), Moment capacity of cold-formed channel beams with edge-stiffened web holes, un-stiffened web holes and plain webs, Thin-Walled Structures, 157, art. no. 107070,
  • Feng, R., Mou, X., Chen, Z., Roy, K., Chen, B., Lim, J.B.P. (2020), Finite-element modelling and design guidelines for axial compressive capacity of aluminium alloy circular hollow sections with holes, Thin-Walled Structures, 157, art. no. 107027,
  • Chen, B., Roy, K., Uzzaman, A., Raftery, G., Lim, J.B.P. (2020), Axial strength of back-to-back cold-formed steel channels with edge-stiffened holes, un-stiffened holes and plain webs, Journal of Constructional Steel Research, 174, art. no. 106313,
  • Jing, J., Clifton, G.C., Roy, K., Lim, J.B.P. (2020), Three-storey modular steel building with a novel slider device: Shake table tests on a scaled down model and numerical investigation, Thin-Walled Structures, 155, art. no. 106932,
  • Feng, R., Wu, C., Chen, Z., Roy, K., Chen, B., Lim, J.B.P. (2020), An experimental study on stainless steel hybrid tubular joints with square braces and circular chord, Thin-Walled Structures, 155, art. no. 106919,
  • Jing, J., Charles Clifton, G., Roy, K., Lim, J.B.P. (2020), Performance of a novel slider device in multi-storey cold-formed steel modular buildings under seismic loading, Structures, 27, pp. 212-246.
  • Taheri, H., Clifton, G.C., Dong, P., Karpenko, M., Raftery, G.M., Lim, J.B.P. (2020), The use of effective full penetration of T-butt welds in welded moment connections, Welding in the World, 64 (9), pp. 1503-1519.
  • Uzzaman, A., Lim, J.B.P., Nash, D., Roy, K. (2020), Web crippling behaviour of cold-formed steel channel sections with edge-stiffened and unstiffened circular holes under interior-two-flange loading condition, Thin-Walled Structures, 154, art. no. 106813,
  • Roy, K., Lau, H.H., Ting, T.C.H., Chen, B., Lim, J.B.P. (2020), Flexural capacity of gapped built-up cold-formed steel channel sections including web stiffeners, Journal of Constructional Steel Research, 172, art. no. 106154,
  • Chen, B., Roy, K., Uzzaman, A., Raftery, G.M., Lim, J.B.P. (2020), Parametric study and simplified design equations for cold-formed steel channels with edge-stiffened holes under axial compression, Journal of Constructional Steel Research, 172, art. no. 106161,
  • Jing, J., Clifton, G.C., Roy, K., Lim, J.B.P. (2020), Seismic protection of modular buildings with bonded rubber unit sliders: Experimental study, Thin-Walled Structures, 154, art. no. 106790,
  • Phan, D.T., Mojtabaei, S.M., Hajirasouliha, I., Lau, T.L., Lim, J.B.P. (2020), Design and Optimization of Cold-Formed Steel Sections in Bolted Moment Connections Considering Bimoment, Journal of Structural Engineering (United States), 146 (8), art. no. 04020153,
  • Lawson, R.M., Way, A.G.J., Heywood, M., Lim, J.B.P., Johnston, R., Roy, K. (2020), Stability of light steel walls in compression with plasterboards on one or both sides, Proceedings of the Institution of Civil Engineers: Structures and Buildings, 173 (6), pp. 394-412.
  • Feng, R., Huang, Z., Chen, Z., Roy, K., Chen, B., Lim, J.B.P. (2020), Finite-element analysis and design of stainless-steel CHS-to-SHS hybrid tubular joints under axial compression, Thin-Walled Structures, 151, art. no. 106728,
  • Feng, R., Chen, Z., Shen, C., Roy, K., Chen, B., Lim, J.B.P. (2020), Flexural capacity of perforated aluminium CHS tubes–An experimental study, Structures, 25, pp. 463-480.
  • Paya-Marin, M.A., Roy, K., Chen, J.-F., Masood, R., Lawson, R.M., Gupta, B.S., Lim, J.B.P. (2020), Large-scale experiment of a novel non-domestic building using BPSC systems for energy saving, Renewable Energy, 152, pp. 799-811.
  • Maguire, J.R., Teh, L.H., Clifton, G.C., Tang, Z.H., Lim, J.B.P. (2020), Cross-aisle seismic performance of selective storage racks, Journal of Constructional Steel Research, 168, art. no. 105999,
  • Phan, D.T., Mojtabaei, S.M., Hajirasouliha, I., Ye, J., Lim, J.B.P. (2020), Coupled element and structural level optimisation framework for cold-formed steel frames, Journal of Constructional Steel Research, 168, art. no. 105867,
  • Russell, M.J., Lim, J.B.P., Roy, K., Clifton, G.C., Ingham, J.M. (2020), Welded steel beam with novel cross-section and web openings subject to concentrated flange loading, Structures, 24, pp. 580-599.
  • Bahrebar, M., Lim, J.B.P., Clifton, G.C., Zirakian, T., Shahmohammadi, A., Hajsadeghi, M. (2020), Perforated steel plate shear walls with curved corrugated webs under cyclic loading, Structures, 24, pp. 600-609.
  • Wang, F., Yang, J., Lim, J.B.P. (2020), Pseudo-plastic Collapse Performance of Multi-span Continuous Beams with CFS Sigma Sections: A Numerical Study, International Journal of Steel Structures, 20 (2), pp. 600-611.
  • Rezaeian, H., Clifton, G.C., MacRae, G.A., Lim, J.B.P. (2020), In-plane cyclic behaviour of composite floor slab diaphragm interfaces under high-shear demand, Journal of Constructional Steel Research, 167, art. no. 105838,
  • Meng, F.-Q., Zhu, M.-C., Clifton, G.C., Ukanwa, K.U., Lim, J.B.P. (2020), Performance of square steel-reinforced concrete-filled steel tubular columns subject to non-uniform fire, Journal of Constructional Steel Research, 166, art. no. 105909,
  • Dar, M.A., Subramanian, N., Atif, M., Dar, A.R., Anbarasu, M., Lim, J.B.P. (2020), Efficient cross-sectional profiling of built up CFS beams for improved flexural performance, Steel and Composite Structures, 34 (3), pp. 333-345.
  • McCrum, D.P., Simon, J., Grimes, M., Broderick, B.M., Wrzesien, A., Lim, J.B.P. (2020), Hybrid seismic testing of cold-formed steel moment-resisting frames, Proceedings of the Institution of Civil Engineers: Structures and Buildings, 173 (2), pp. 88-98.
  • Uzzaman, A., Lim, J.B.P., Nash, D., Roy, K. (2020), Cold-formed steel channel sections under end-two-flange loading condition: Design for edge-stiffened holes, unstiffened holes and plain webs, Thin-Walled Structures, 147, art. no. 106532,
  • Lowe, D., Roy, K., Das, R., Clifton, C.G., Lim, J.B.P. (2020), Full scale experiments on splitting behaviour of concrete slabs in steel concrete composite beams with shear stud connection, Structures, 23, pp. 126-138.
  • Adil Dar, M., Subramanian, N., Dar, D.A., Dar, A.R., Anbarasu, M., Lim, J.B.P., Mahjoubi, S. (2020), Flexural Strength of cold-formed steel built-up composite beams with rectangular compression flanges, Steel and Composite Structures, 34 (2), pp. 171-188.
  • Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2020), Numerical investigation and parametric study on the behaviour of axially loaded back-to-back gapped built-up cold-formed steel channels, Proceedings of the 9th International Conference on Advances in Steel Structures, ICASS 2018
  • Pourmasoud, M.M., Lim, J.B.P., Hajirasouliha, I., McCrum, D. (2020), Multi-Directional Base Isolation System for Coupled Horizontal and Vertical Seismic Excitations, Journal of Earthquake Engineering,
  • Rezaeian, H., Clifton, G.C., Lim, J.B.P. (2020), Failure modes for composite steel deck diaphragms subjected to in-plane shear forces – A review, (2020) Engineering Failure Analysis, 107, art. no. 104199.

2019

  • Mathieson, C., Roy, K., Charles Clifton, G., Ahmadi, A., Lim, J.B.P. (2019), Failure mechanism and bearing capacity of cold-formed steel trusses with HRC connectors, Engineering Structures, 201, art. no. 109741,
  • Roy, K., Lau, H.H., Huon Ting, T.C., Masood, R., Kumar, A., Lim, J.B.P. (2019), Experiments and finite element modelling of screw pattern of self-drilling screw connections for high strength cold-formed steel, Thin-Walled Structures, 145, art. no. 106393,
  • Beulah Gnana Ananthi, G., Roy, K., Chen, B., Lim, J.B.P. (2019), Testing, simulation and design of back-to-back built-up cold-formed steel unequal angle sections under axial compression, Steel and Composite Structures, 33 (4), pp. 595-614.
  • Rezaeian, H., Clifton, G.C., MacRae, G.A., Hogan, L., Lim, J.B.P. (2019), In-plane behaviour of composite floor slab diaphragm interfaces under high shear demand, Journal of Constructional Steel Research, 162, art. no. 105715,
  • Chen, B., Roy, K., Uzzaman, A., Raftery, G.M., Nash, D., Clifton, G.C., Pouladi, P., Lim, J.B.P. (2019), Effects of edge-stiffened web openings on the behaviour of cold-formed steel channel sections under compression, Thin-Walled Structures, 144, art. no. 106307,
  • Dar, M.A., Subramanian, N., Rather, A.I., Dar, A.R., Lim, J.B.P., Anbarasu, M., Roy, K. (2019), Effect of angle stiffeners on the flexural strength and stiffness of cold-formed steel beams, Steel and Composite Structures, 33 (2), pp. 225-243.
  • Roy, K., Lau, H.H., Lim, J.B.P. (2019), Finite element modelling of back back-to-back built built-up cold cold-formed stainless-steel lipped channels under axial compression, Steel and Composite Structures, 33 (1), pp. 869-898.
  • Ramaswami, G., Susnjak, T., Mathrani, A., Lim, J., Garcia, P. (2019), Using educational data mining techniques to increase the prediction accuracy of student academic performance, Information and Learning Science, 120 (7-8), pp. 451-467.
  • Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2019), Experimental and numerical investigations on the axial capacity of cold-formed steel built-up box sections, Journal of Constructional Steel Research, 160, pp. 411-427.
  • Roy, K., Lim, J.B.P., Lau, H.H., Yong, P.M., Clifton, G.C., Wrzesien, A., Mei, C.C. (2019), Collapse behaviour of a fire engineering designed single-storey cold- formed steel building in severe fires, Thin-Walled Structures, 142, pp. 340-357.
  • Pouladi, P., Ronaldson, J., Clifton, G.C., Ingham, J.M., Wrzesien, A.M., Lim, J.B.P. (2019), Finite-element assisted design of eaves joint of cold-formed steel portal frames having single channel-sections, Structures, 20, pp. 452-464.
  • Maguire, J.R., Teh, L.H., Clifton, G.C., Lim, J.B.P. (2019), Residual capacity of cold-formed steel rack uprights following stomping during rocking, Journal of Constructional Steel Research, 159, pp. 189-197.
  • Roy, K., Lim, J.B.P. (2019), Numerical investigation into the buckling behaviour of face-to-face built-up cold-formed stainless steel channel sections under axial compression, Structures, 20, pp. 42-73.
  • Roy, K., Lau, H.H., Lim, J.B.P. (2019), Numerical investigations on the axial capacity of back-to-back gapped built-up cold-formed stainless steel channels, Advances in Structural Engineering, 22 (10), pp. 2289-2310.
  • van Thienen, M., Lim, J.B.P., Behrouzi, A., Garcia, P., Banker-Hix, W. (2019), E-learning tools to facilitate instruction of a large enrollment structural engineering course, ASEE Annual Conference and Exposition, Conference Proceedings,
  • Mathison, C., Roy, K., Charles Clifton, G., Ahmadi, A., Masood, R., Lim, J.B.P. (2019), Novel pin jointed moment connection for cold-formed steel trusses, Steel and Composite Structures, 31 (5), pp. 453-467.
  • Yousefi, A.M., Lim, J.B.P., Charles Clifton, G. (2019), Web crippling strength of perforated cold-formed ferritic stainless steel unlipped channels with restrained flanges under one-flange loadings, Thin-Walled Structures, 137, pp. 94-105.
  • McCrum, D.P., Simon, J., Grimes, M., Broderick, B.M., Lim, J.B.P., Wrzesien, A.M. (2019), Experimental cyclic performance of cold-formed steel bolted moment resisting frames, Engineering Structures, 181, pp. 1-14.
  • Roy, K., Ting, T.C.H., Lau, H.H., Bhatnagar, S., Lim, J.B.P. (2019), Finite element modeling of back-to-back built-up cfs un-lipped channels under axial compression, Materials Science Forum, 969 MSF, pp. 819-827.
  • Masood, R., Gonzalez, V., Lim, J.B.P., Cabrera, G. (2019), Trends in housing offsite manufacturing supply chain management (HOSCM) research, Proceedings of 22nd International Conference on Advancement of Construction Management and Real Estate, CRIOCM 2017, pp. 763-771.
  • Beulah Gnana Ananthi, G., Roy, K., Lim, J.B.P. (2019), Experimental and numerical investigations on axial strength of back-to-back built-up cold-formed steel angle columns, Steel and Composite Structures, 31 (6), pp. 601-615.
  • Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2019), Experimental Investigation into the Behaviour of CFS Built-Up Channels Subjected to Axial Compression, Lecture Notes in Civil Engineering, 34, pp. 89-105.
  • Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2019), Finite Element Modelling of Built-Up CFS Channel Columns Under Axial Load, Lecture Notes in Civil Engineering, 34, pp. 65-87.
  • Roy, K., Mohammadjani, C., Lim, J.B.P. (2019), Experimental and numerical investigation into the behaviour of face-to-face built-up cold-formed steel channel sections under compression, Thin-Walled Structures, 134, pp. 291-309.
  • Dar, M.A., Subramanian, N., Dar, A.R., Anbarasu, M., Lim, J.B.P., Atif, M. (2019), Behaviour of partly stiffened cold-formed steel built-up beams: Experimental investigation and numerical validation, Advances in Structural Engineering, 22 (1), pp. 172-186.
  • Yousefi, A.M., Lim, J.B.P., Clifton, G.C. (2019), Web crippling design of cold-formed ferritic stainless steel unlipped channels with fastened flanges under end-two-flange loading condition, Journal of Constructional Steel Research, 152, pp. 12-28.

2018

  • Yousefi, A.M., Lim, J.B.P., Clifton, G.C. (2018), Cold-formed ferritic stainless steel unlipped channels with web perforations subject to web crippling under one-flange loadings, Construction and Building Materials, 191, pp. 713-725.
  • Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2018), Effect of thickness on the behaviour of axially loaded back-to-back cold-formed steel built-up channel sections - Experimental and numerical investigation, Structures, 16, pp. 327-346.
  • Ukanwa, K.U., Clifton, G.C., Lim, J.B.P., Hicks, S.J., Sharma, U., Abu, A. (2018), Design of a continuous concrete filled steel tubular column in fire, Thin-Walled Structures, 131, pp. 192-204.Yousefi, A.M., Lim, J.B.P., Charles Clifton, G.
  • Yousefi, A.M., Lim, J.B.P., Clifton, G.C. (2018), Web Crippling Behavior of Unlipped Cold-Formed Ferritic Stainless Steel Channels Subject to One-Flange Loadings, Journal of Structural Engineering (United States), 144 (8), art. no. 04018105,
  • Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2018), Nonlinear behaviour of back-to-back gapped built-up cold-formed steel channel sections under compression, Journal of Constructional Steel Research, 147, pp. 257-276.
  • Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2018), Nonlinear behavior of axially loaded back-to-back built-up cold-formed steel un-lipped channel sections, Steel and Composite Structures, 28 (2), pp. 233-250.
  • Adil Dar, M., Subramanian, N., Anbarasu, M., Dar, A.R., Lim, J.B.P. (2018), Structural performance of cold-formed steel composite beams, Steel and Composite Structures, 27 (5), pp. 545-554.
  • Lu, L., Xu, Y., Liu, J., Lim, J.B.P. (2018), Cyclic performance and design recommendations of a novel weak-axis reduced beam section connection, Steel and Composite Structures, 27 (3), pp. 337-353
  • Ye, J., Becque, J., Hajirasouliha, I., Mojtabaei, S.M., Lim, J.B.P. (2018), Development of optimum cold-formed steel sections for maximum energy dissipation in uniaxial bending, Engineering Structures, 161, pp. 55-67.
  • Lu, L., Xu, Y., Zheng, H., Lim, J.B.P. (2018), Cyclic response and design procedure of a weak-axis cover-plate moment connection, Steel and Composite Structures, 26 (3), pp. 329-345.
  • Ting, T.C.H., Roy, K., Lau, H.H., Lim, J.B.P. (2018), Effect of screw spacing on behavior of axially loaded back-to-back cold-formed steel built-up channel sections, Advances in Structural Engineering, 21 (3), pp. 474-487.
  • Johnston, R.P.D., McGrath, T., Nanukuttan, S., Lim, J.B.P., Soutsos, M., Chiang, M.C., Masood, R., Rahman, M.A. (2018), Sustainability of Cold-formed Steel Portal Frames in Developing Countries in the Context of Life Cycle Assessment and Life Cycle Costs, Structures, 13, pp. 79-87.
  • Ukanwa, K.U., Clifton, G.C., Lim, J.B.P., Hicks, S.J., Sharma, U., Abu, A. (2018), Simple design procedure for concrete filled steel tubular columns in fire, Engineering Structures, 155, pp. 144-156.
  • Lu, L., Xu, Y., Lim, J.B.P. (2018), Mechanical performance of a new I-section weak-axis column bending connection, Steel and Composite Structures, 26 (1), pp. 31-44.
  • Nöldgen, M., Lim, J.B.P., Giebat, S. (2018), Virtual design of adaptive road-bridge-types in a comprehensive 5dbim assessment, Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges - Proceedings of the 9th International Conference on Bridge Maintenance, Safety and Management, IABMAS 2018, pp. 1754-1760.
  • Yousefi, A.M., Lim, J.B.P., Charles Clifton, G. (2018), Web bearing capacity of cold-formed ferritic stainless steel unlipped channels with web perforations under the end-two-flange (ETF) loading, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 69-81.
  • Roy, K., Lim, J.B.P., Yousefi, A.M., Charles Clifton, G., Mahendran, M. (2018), Low fatigue response of crest-fixed cold-formed steel drape curved roof claddings, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 713-727.
  • Wrzesien, A.M., Lim, J.B.P., MacLeod, I.A., Lawson, R.M (2018), Stressed skin design of steel sheeting panels - Part 2: Shear panels with sheeting fixed on all 4 sides, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 763-783.
  • Yousefi, A.M., Lim, J.B.P., Charles Clifton, G. (2018), Web crippling behaviour of cold-formed ferritic stainless steel unlipped channels under interior-one-flange and end-one-flange loadings, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 83-87.
  • Pouladi, P., Ronaldson, J., Clifton, G.C., Ingham, J.M., Wrzesien, A.M., Milewski, P., Lim, J.B.P. (2018), Finite element assisted design of the eaves joint of cold-formed steel portal frames using single channel-sections, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 529-543.
  • Van Thienen, M., Dimyadi, J., Lim, J.B.P., Charles Clifton, G. (2018), Critical design criteria for standard, truncated, and parallel chords cold-formed steel trusses, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 859-877.
  • Uzzaman, A., Lim, J.B.P., Nash, D., Yousefi, A.M., Young, B. (2018), Parametric studies and design recommendations of cold-formed steel sections with edge-stiffened circular holes subjected to web crippling, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 179-189.
  • Uzzaman, A., Lim, J.B.P., Nash, D., Yousefi, A.M., Young, B. (2018), Experimental and analytical studies of cold-formed steel sections with edge-stiffened circular holes subjected to web crippling, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 163-178.
  • Wrzesien, A.M., Lim, J.B.P., MacLeod, I.A., Lawson, R.M. (2018), Stressed skin design of steel sheeting panels - Part 1: Shear resistance and flexibility of screw lapped joints, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 745-761.
  • Ukanwa, K., Clifton, G.C., Lim, J.B.P., Abu, A., Hicks, S.J., Sharma, U.K. (2018), Behaviour and design of a continuous concrete-filled steel tubular column in fire for a multi-storey building, Tubular Structures XVI - Proceedings of the 16th International Symposium on Tubular Structures, ISTS 2017, pp. 323-331.
  • Giebat, S., Bach, A., Nöldgen, M., Lim, J. (2018), Parametric, adaptive design and analysis of standardized steel composite bridges IABSE Symposium, Nantes 2018: Tomorrow's Megastructures, pp. S5-103-S5-110.
  • Karami, Z., Raftery, G.M., Lim, J., Nicholson, C. (2018), Bond quality of one-component polyurethane bonded laminated timber exposed to wet climatic conditions, WCTE 2018 - World Conference on Timber Engineering,
  • Ukanwa, K., Clifton, G.C., Lim, J.B.P., Abu, A., Hicks, S.J., Sharma, U.K. (2018), Fire design of continuous concrete filled steel tubular column for a multi-storey building, Applications of Fire Engineering - Proceedings of the International Conference of Applications of Structural Fire Engineering, ASFE 2017, pp. 45-52.
  • Ukanwa, K.U., Clifton, C.G., Lim, J.B.P., Hicks, S., Sharma, U.K. (2018), Numerical analysis of plain and steel fiber reinforced concrete filled steel tubular slender column, Advanced Steel Construction, 14 (2), pp. 308-323.
  • Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2018), Experimental investigation into the behaviour of back-to-back gapped built-up cold-formed steel channel sections under compression, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 283-297.

2017

  • Ukanwa, K., Clifton, G.C., Lim, J.B.P., Abu, A., Hicks, S.J., Sharma, U.K. (2018), Behaviour and design of a continuous concrete-filled steel tubular column in fire for a multi-storey building, Tubular Structures XVI - Proceedings of the 16th International Symposium on Tubular Structures, ISTS 2017, pp. 323-331.
  • Giebat, S., Bach, A., Nöldgen, M., Lim, J. (2018), Parametric, adaptive design and analysis of standardized steel composite bridges IABSE Symposium, Nantes 2018: Tomorrow's Megastructures, pp. S5-103-S5-110.
  • Karami, Z., Raftery, G.M., Lim, J., Nicholson, C. (2018), Bond quality of one-component polyurethane bonded laminated timber exposed to wet climatic conditions, WCTE 2018 - World Conference on Timber Engineering,
  • Ukanwa, K., Clifton, G.C., Lim, J.B.P., Abu, A., Hicks, S.J., Sharma, U.K. (2018), Fire design of continuous concrete filled steel tubular column for a multi-storey building, Applications of Fire Engineering - Proceedings of the International Conference of Applications of Structural Fire Engineering, ASFE 2017, pp. 45-52.
  • Ukanwa, K.U., Clifton, C.G., Lim, J.B.P., Hicks, S., Sharma, U.K. (2018), Numerical analysis of plain and steel fiber reinforced concrete filled steel tubular slender column, Advanced Steel Construction, 14 (2), pp. 308-323.
  • Roy, K., Ting, T.C.H., Lau, H.H., Lim, J.B.P. (2018), Experimental investigation into the behaviour of back-to-back gapped built-up cold-formed steel channel sections under compression, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2018 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 283-297.
  • Mohammadjani, C., Yousefi, A.M., Cai, S.Q., Clifton, G.C., Lim, J.B.P. (2017), Strength and stiffness of cold-formed steel portal frame joints using quasi-static finite element analysis, Steel and Composite Structures, 25 (6), pp. 727-734.
  • Yousefi, A.M., Lim, J.B.P., Clifton, G.C. (2017), Web bearing capacity of unlipped cold-formed ferritic stainless steel channels with perforated web subject to end-two-flange (ETF) loading, Engineering Structures, 152, pp. 804-818.
  • Ukanwa, K.U., Lim, J.B.P., Sharma, U.K., Hicks, S.J., Abu, A., Charles Clifton, G. (2017), Behaviour of continuous concrete filled steel tubular columns loaded eccentrically in fire, Journal of Constructional Steel Research, 139, pp. 280-287.
  • Yousefi, A.M., Uzzaman, A., Lim, J.B.P., Clifton, G.C., Young, B. (2017), Web crippling strength of cold-formed stainless-steel lipped channels with web perforations under end-two-flange loading, Advances in Structural Engineering, 20 (12), pp. 1845-1863.
  • Ukanwa, K.U., Sharma, U., Hicks, S.J., Abu, A., Lim, J.B.P., Clifton, G.C. (2017), Behaviour of continuous concrete filled steel tubular columns loaded concentrically in fire, Journal of Constructional Steel Research, 136, pp. 101-109.
  • Yousefi, A.M., Lim, J.B.P., Uzzaman, A., Lian, Y., Clifton, G.C., Young, B. (2017), Design of cold-formed stainless steel lipped channel sections with web openings subjected to web crippling under end-one-flange loading condition, Advances in Structural Engineering, 20 (7), pp. 1024-1045.
  • Yousefi, A.M., Lim, J.B.P., Charles Clifton, G. (2017), Cold-formed ferritic stainless steel unlipped channels with web openings subjected to web crippling under interior-two-flange loading condition – Part I: Tests and finite element model validation, Thin-Walled Structures, 116, pp. 333-341.
  • Yousefi, A.M., Lim, J.B.P., Clifton, G.C. (2017), Cold-formed ferritic stainless steel unlipped channels with web openings subjected to web crippling under interior-two-flange loading condition – Part II: Parametric study and design equations, Thin-Walled Structures, 116, pp. 342-356.
  • Phan, D.T., Lim, J.B.P., Tanyimboh, T.T., Sha, W. (2017), Optimum design of cold-formed steel portal frame buildings including joint effects and secondary members, International Journal of Steel Structures, 17 (2), pp. 427-442.
  • Uzzaman, A., Lim, J.B.P., Nash, D., Young, B. (2017), Effects of edge-stiffened circular holes on the web crippling strength of cold-formed steel channel sections under one-flange loading conditions, Engineering Structures, 139, pp. 96-107.
  • Lian, Y., Uzzaman, A., Lim, J.B.P., Abdelal, G., Nash, D., Young, B. (2017), Web crippling behaviour of cold-formed steel channel sections with web holes subjected to interior-one-flange loading condition – Part II: parametric study and proposed design equations, Thin-Walled Structures, 114, pp. 92-106.
  • Lian, Y., Uzzaman, A., Lim, J.B.P., Abdelal, G., Nash, D., Young, B. (2017), Web crippling behaviour of cold-formed steel channel sections with web holes subjected to interior-one-flange loading condition-Part I: Experimental and numerical investigation, Thin-Walled Structures, 111, pp. 103-112.
  • Yousefi, A.M., Uzzaman, A., Lim, J.B.P., Clifton, G.C., Young, B. (2017), Numerical investigation of web crippling strength in cold-formed stainless steel lipped channels with web openings subjected to interior-two-flange loading condition, Steel and Composite Structures, 23 (3), pp. 363-383.
  • Masood, R., Gonzalez, V., Lim, J.B.P. (2017), Value stream mapping - A case study of cold-formed steel house framing for offsite manufacturing supply chain, IGLC 2017 - Proceedings of the 25th Annual Conference of the International Group for Lean Construction, pp. 829-836.

2016

  • Zirakian, T., Hajsadeghi, M., Lim, J.B.P., Bahrebar, M. (2016), Structural performance of corrugated web steel coupling beams, Proceedings of the Institution of Civil Engineers: Structures and Buildings, 169 (10), pp. 756-764.
  • Lian, Y., Uzzaman, A., Lim, J.B.P., Abdelal, G., Nash, D., Young, B. (2016), Effect of web holes on web crippling strength of cold-formed steel channel sections under end-one-flange loading condition - Part II: Parametric study and proposed design equations, Thin-Walled Structures, 107, pp. 489-501.
  • Lian, Y., Uzzaman, A., Lim, J.B.P., Abdelal, G., Nash, D., Young, B. (2016), Effect of web holes on web crippling strength of cold-formed steel channel sections under end-one-flange loading condition – Part I: Tests and finite element analysis, Thin-Walled Structures, 107, pp. 443-452.
  • Bahrebar, M., Kabir, M.Z., Hajsadeghi, M., Zirakian, T., Lim, J.B.P. (2016), Structural performance of steel plate shear walls with trapezoidal corrugations and centrally-placed square perforations, International Journal of Steel Structures, 16 (3), pp. 845-855.
  • Uzzaman, A., Wrzesien, A.M., Lim, J.B.P., Hamilton, R., Nash, D. (2016), Design of Top-hat Purlins for Cold-formed Steel Portal Frames, Structures, 7, pp. 113-125.
  • Bahrebar, M., Kabir, M.Z., Zirakian, T., Hajsadeghi, M., Lim, J.B.P. (2016), Structural performance assessment of trapezoidally-corrugated and centrally-perforated steel plate shear walls, Journal of Constructional Steel Research, 122, pp. 584-594.
  • Ahmadi, A., Mathieson, C., Clifton, G.C., Das, R., Lim, J.B.P. (2016), An experimental study on a novel cold-formed steel connection for light gauge open channel steel trusses, Journal of Constructional Steel Research, 122, pp. 70-79.
  • Yousefi, A.M., Lim, J.B.P., Uzzaman, A., Lian, Y., Clifton, G.C., Young, B. (2016), Web crippling strength of cold-formed stainless steel lipped channel-sections with web openings subjected to interior-one-flange loading condition, Steel and Composite Structures, 21 (3), pp. 629-659.
  • Lim, J.B.P., Wrzesien, A.M., Nethercot, D.A. (2016), Sustainable applications of cold-formed steel structures: Portal frames, Recent Trends in Cold-Formed Steel Construction, pp. 265-303.
  • Wrzesien, A.M., Phan, D.T., Lim, J.B.P., Lau, H.-H., Hajirasouliha, I., Tan, C.S. (2016), Effect of stressed-skin action on optimal design of cold-formed steel square and rectangular-shaped portal frame buildings, International Journal of Steel Structures, 16 (2), pp. 299-307.
  • McKinstray, R., Lim, J.B.P., Tanyimboh, T.T., Phan, D.T., Sha, W. (2016), Comparison of optimal designs of steel portal frames including topological asymmetry considering rolled, fabricated and tapered sections, Engineering Structures, 111, pp. 505-524.
  • Lim, J.B.P., Hancock, G.J., Charles Clifton, G., Pham, C.H., Das, R. (2016), DSM for ultimate strength of bolted moment-connections between cold-formed steel channel members, Journal of Constructional Steel Research, 117, pp. 196-203.
  • Mo, K.H., Alengaram, U.J., Jumaat, M.Z., Liu, M.Y.J., Lim, J. (2016), Assessing some durability properties of sustainable lightweight oil palm shell concrete incorporating slag and manufactured sand, Journal of Cleaner Production, 112, pp. 763-770.
  • Johnston, R.P.D., Lim, J.B.P., Lau, H.H., Xu, Y., Sonebi, M., Armstrong, C.G., Mei, C.C. (2016), Finite-element investigation of cold-formed steel portal frames in fire, Proceedings of the Institution of Civil Engineers: Structures and Buildings, 169 (1), pp. 3-19.
  • Ahmadi, A., Yee, C.K.L., Shepherd, H.J.S., Clifton, G.C., Das, R., Lim, J.B.P. (2016)
  • Behaviour of cold-formed steel trusses with concentric and eccentric joint arrangements using the Howick Rivet Connector, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2016 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 647-664.
  • Yousefi, A.M., Lim, J.B.P., Uzzaman, A., Lian, Y., Clifton, G.C., Young, B. (2016)
  • Web crippling strength of cold-formed duplex stainless steel lipped channel-sections with web openings subjected to interior-one-flange loading condition, Wei-Wen Yu International Specialty Conference on Cold-Formed Steel Structures 2016 - Recent Research and Developments in Cold-Formed Steel Design and Construction, pp. 313-324.
  • Ye, J., Hajirasouliha, I., Becque, J., Lim, J.B.P (2016), Optimisation of cold-formed steel sections for maximum energy dissipation capacity and strength, Proceedings of the International Colloquium on Stability and Ductility of Steel Structures, SDSS 2016, pp. 435-442.
  • Foster, P., Abdelal, G., Lim, J.B.P., Hajsadeghi, M., McCrum, D. (2016), Finite element modelling of cyclic behaviour of cold-formed steel bolted moment-resisting connections, Journal of Construction in Developing Countries, 21 (1), pp. 167-180.
  • Mathieson, C., Clifton, G.C., Lim, J.B.P. (2016), Novel pin-jointed connection for cold-formed steel trusses, Journal of Constructional Steel Research, 116, pp. 173-182.

2015

2014

2013

2012

2011

Early 2000s